Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterMortar Repointing in Henderson, NV
Mortar repointing in Henderson typically costs $900 to $2,800 for a standard chimney, with most jobs falling between $1,200 and $1,800. The work involves cutting out deteriorated mortar joints and packing fresh mortar in its place, which restores the structural bond between bricks and stops water from working its way into your chimney system. Repointing is the single most common our Chimney Repair services we perform on Henderson chimneys, because our desert climate is genuinely rough on mortar.
Flint Chimney Co Henderson has been repointing chimneys in this valley since 2002, and every job starts the same way: a written price before any work begins. If you’re seeing crumbling mortar or hairline cracks between bricks, call us at (775) 375-4267 and we’ll take a look. This is a core part of our Chimney Repair in Henderson work, and our repointing carries the same written one-year guarantee as every other repair we do.
Hank Delano, our owner, built this company around The Garrison Standard: document everything, price everything up front, and stand behind every repair in writing. Repointing is no exception. The crew that shows up at your door is background-checked, uniformed, and expects to be held to that standard.
Key Takeaways
- Mortar repointing restores the joints between bricks, not the bricks themselves.
- Henderson’s heat and low humidity accelerate mortar decay faster than coastal climates.
- Repointing typically costs $900 to $2,800 depending on chimney height, access, and the extent of joint damage.
- Every repointing job from Flint Chimney Co Henderson includes a written one-year guarantee.
- We give you a written price before any tools come off the truck.
When You Need Mortar Repointing
The short answer: if you can see gaps, crumbling, or missing mortar between bricks, the chimney needs repointing. Catching this early is the difference between a $1,200 repointing job and a $5,000-plus Spalling Brick Repair. Below are the specific signs we see most often across Henderson, Anthem, Green Valley, and Inspirada.
- Crumbling or sandy mortar joints. Run your thumb across a joint. If a layer of grit comes away, the mortar is losing its cement binder. In Henderson’s dry air, mortar gives up moisture quickly over decades, and eventually the surface turns to dust.
- Visible cracks running through the mortar. Hairline cracking is the first warning. Cracks wider than a credit card edge mean water is already working into the joint, and every hard rain widens the gap through freeze-thaw expansion. Yes, even here, winter nights can dip low enough to matter.
- Missing chunks of mortar nothing caused. If you find pieces of mortar on your roof, driveway, or lawn after a windstorm, the joints are failing from the surface inward. Desert wind accelerates erosion once the surface binder has weakened.
- Water stains on the interior wall near the fireplace. Water that gets past a failing mortar joint travels down inside the chimney chase, and the first sign is often discoloration on the drywall or plaster of the wall the chimney runs through.
- White chalky residue (efflorescence) on brick surfaces. Water carrying dissolved salts moves through brick, then evaporates on the surface and leaves the salt behind. That white bloom tells you water is moving through places it should not be.
- Loose bricks or brick edge spalling. When mortar fails completely, bricks lose their bond and start to shift or flake away at the surface. Loose brick is past the early-warning stage and needs attention immediately.
Our Mortar Repointing Process
Here’s exactly how we handle repointing. The process is disciplined and the same for a 10-foot ranch chimney in Paradise Hills as it is for a 30-foot center-chimney in MacDonald Highlands.
- Written estimate and condition report. We inspect the chimney, measure the damaged area, and give you a written price for the exact scope of work. No ranges, no “we’ll see what we find.” The number on the quote is the number on the invoice.
- Joint cutting and surface prep. We remove deteriorated mortar to a depth of about 1 inch, using hand tools and small grinders. We don’t cut corners here: shallow cutting means the new mortar has nothing to grip, and you’re back to square one in three years. The goal is a clean, square joint bed.
- Dust control and cleanup. Cutting mortar creates dust, and nothing about our reputation tolerates leaving a mess on your property. We tarp the work area, protect landscaping near the chimney, and clean thoroughly at the end of every workday.
- Mortar matching and application. This is where experience matters. Modern Portland cement mortar is often too hard for older brick. We match the compressive strength of the original mortar, and we match the color and texture as closely as possible. We pack the joints in tight lifts, tooling the surface to match the existing joint profile.
- Final inspection and written guarantee. Before we leave, we walk the job with you. You point out anything that doesn’t look right, and we fix it. Then we hand you a written guarantee that covers the repointing work for one full year. If a covered repair fails within 365 days, we return at no charge, no argument.
Mortar Repointing Pricing in Henderson
Repointing costs in Henderson run from about $900 for a small, easily accessed chimney with minor joint deterioration to around $2,800 for a tall chimney with extensive damage and difficult roof access. Most of the repointing jobs we quote land between $1,200 and $1,800. Here’s how the numbers break down by scope:
| Job Scope | Typical Price Range | What’s Included |
|---|---|---|
| Small chimney, minor joint repair | $900 – $1,300 | Joint cutting, mortar packing, tooling, cleanup |
| Standard chimney, moderate repointing | $1,200 – $1,800 | Full joint prep, mortar color matching, full guarantee |
| Tall or hard-access chimney | $1,800 – $2,800 | Scaffolding or lift equipment, accessibility surcharges |
| Full above-roof repointing | $2,200 – $3,500 | Complete joint replacement above the roofline, crown repairs often recommended |
What drives the price up: chimney height, the percentage of joints that need cutting, whether we need scaffolding or a lift, and the amount of mortar color and texture matching required for older brick. Every estimate is free. Call (775) 375-4267 and we’ll give you a written price for the exact work your chimney needs.
FAQs – Mortar Repointing
How much does mortar repointing cost in Henderson?
Mortar repointing in Henderson typically costs between $900 and $2,800, with most jobs landing around $1,200 to $1,800. The final price depends on chimney height, access, and the extent of joint damage, and you’ll always get a written quote from us before any work begins. Call (775) 375-4267 for a free estimate, and the number we give you is the number you’ll pay.
Is repointing a chimney something I can do myself?
The honest answer: it’s a task that requires working at height, removing mortar at proper depth, and matching mortar strength and color correctly. Roof work is dangerous, and an improperly repointed joint will fail within a couple of years and cost more to fix the second time. The risk to both your safety and your chimney makes professional repointing the better call for most homeowners.
How long does repointing last in the Henderson climate?
A properly done repointing job in Henderson should last 20 to 35 years, assuming the chimney cap is intact and no other structural issues exist. Mortar matched to the original brick compressive strength is key here. If the mortar is too hard, it will crack the brick edges instead of degrading gradually. The written one-year guarantee from Flint Chimney Co Henderson covers workmanship and material failure for the full first year, but the work itself should hold for decades.
How long does a repointing job take?
Most standard repointing jobs in Henderson take one full day for the actual work, occasionally two if scaffolding or lift equipment is required. We arrive inside the window we give you, do the work, clean up, and walk through the job with you before we leave. If a covered repair fails within the guarantee period, we come back at no charge.
Why Henderson Homeowners Choose Flint Chimney Co Henderson
Henderson’s climate means our chimneys deal with unique stresses: low humidity, intense sun, and summer dust storms that sandblast exposed mortar. Those conditions make repointing a recurring fact of homeownership here. We’ve been doing this work since 2002 as part of the Garrison Partners family of independently owned chimney service companies, and our owners here in Henderson follow The Garrison Code: the written, non-negotiable set of operating rules that governs how every Garrison Partners location runs.
What that means for your repointing job is simple. You get a written price before work starts, every time. You get background-checked, uniformed technicians. You get a written one-year guarantee. And when you call (775) 375-4267, a live person answers the phone, 24 hours a day, seven days a week. No voicemail trees, no callback forms, no waiting until Monday.
We specify professional-grade materials by the job. For repointing, that means selecting the right mortar type and strength for your specific brick, not just whatever is cheapest off the shelf at the supplier. When a chimney needs more than repointing, like a new crown or a flue issue, we use products from trusted chimney trade brands such as Olympia Chimney, HeatShield, and DuraFlex, and we’ll tell you exactly what we’re using and why before we start.
Every repair we make is covered by the 365-Day Done Right Promise. That means if it’s not done right, we make it right, with a written guarantee included on every repointing job. No fine print, no caveats. If a covered repair fails within a year, your follow-up visit is free.
Hank Delano and the team at Flint Chimney Co Henderson don’t believe in making you guess what a repair costs or whether it will hold up. We put both in writing. If your chimney needs repointing, or if you’re not sure and want a professional assessment of the mortar joints, call us at (775) 375-4267 for a free estimate. We’ll give you a straight answer and a price you can plan on.
Written by Hank Delano, Owner at Flint Chimney Co Henderson, serving Henderson.