Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Henderson Homeowners
A chimney sweep in Henderson typically costs between $189 and $329 for a standard cleaning and inspection, and most homes in the area need one every one to three years depending on how often you burn. The reason is straightforward: Henderson’s low winter humidity and frequent wind mean creosote builds up differently here than in wetter climates, and the fine desert dust that settles into flues turns what would be a minor coating into a gritty, stubborn layer that a basic brush alone won’t remove. Flint Chimney Co Henderson has served this valley since 2002 under The Garrison Standard, the same operating code every Garrison Partners location follows, and you can review our Chimney Sweep Maintenance Checklist for Henderson Homeowners to see what we cover. That means one thing for you: a written price before any tool comes off the truck, a uniformed and background-checked technician at your door, and a full-year guarantee on any repair we recommend. Call (775) 375-4267 and a live person answers, day or night.
Key Takeaways
- A standard chimney sweep in Henderson runs $189 to $329, with inspection included.
- Every job gets a written price before work starts. No exceptions, no door surprises.
- All repairs carry the 365-Day Done Right Promise in writing, valid for one full year.
- We dispatch background-checked, uniformed technicians and answer the phone 24/7 with a live person.
- We use trade-grade materials like DuraFlex and HeatShield, specified per job, not per margin.
Styles & brands we work with





Chimney Sweep Services
Our Chimney Sweep in Henderson covers the full scope of removing combustible deposits from your flue, smoke chamber, damper, and firebox so your fireplace drafts correctly and burns without pushing smoke or carbon monoxide back into the living space. In Henderson, where wind-driven dust mixes with creosote and hardens into a glaze, a sweep here is less like dusting and more like mechanical descaling.
Soot and Creosote Removal
We remove stage-one soot, stage-two flaky creosote, and stage-three glazed creosote, the tarry kind that fuels chimney fires. Our technicians use rotary whip heads with nylon or steel cables matched to your flue liner type, so a Terra Cotta liner in Green Valley gets different treatment than a stainless liner in Anthem.

Smoke Chamber and Damper Cleaning
The smoke chamber above the firebox catches more debris than most homeowners realize, and a clogged damper is the single most common reason a fireplace smokes back into the room. We brush and vacuum both as part of every Henderson chimney sweep service call, then confirm the damper opens and seats fully before we pack up.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Cleaning
Chimney Cleaning is the physical removal of soot, creosote, and debris from the interior walls of your flue, the smoke chamber, and the firebox using brushes, rotary equipment, and HEPA-filtered vacuums. You need it when creosote reaches 1/8 inch of buildup, when you smell smoke in the house after a fire, or when it has been more than a year since the last cleaning. A standard chimney cleaning in Henderson falls in the $189 to $329 range, with inspection included.
Levels of Buildup We Handle
We treat light, moderate, and heavy creosote on every type of flue lining found in Henderson homes, including unlined masonry, tile, and stainless steel. A heavy glaze in a Whitney rental or a Sunrise Manor older home often takes longer and uses chemical treatment before mechanical removal, which is why we price the job in writing before starting, never after.
Why Henderson Homes Build Up Faster
Our technicians see more wind-driven dust inside flues here than in most markets, and dust mixed with creosote creates a cement-like layer that standard flat-wire brushes don’t fully strip. That’s why we run rotary loops on most Henderson chimneys, because the round scrubbing action breaks the bond without gouging the liner.
Fireplace Cleaning
Fireplace Cleaning addresses the firebox itself: removing ash, hardened soot crust, and debris around the grate, the hearth, and the refractory panels, then checking that the firebrick and mortar joints are still sound. In Henderson, a fireplace cleaning runs $189 to $329 and is almost always done together with a full chimney sweep, because a clean firebox on a dirty flue does nothing for safety or draft.
Firebox and Grate Service
We vacuum the firebox fully, scrape the floor and walls, clean the grate of baked-on soot, and inspect refractory panels for cracks. Cracked panels in a Paradise or Southern Highlands home should be replaced rather than ignored, because they expose the metal firebox shell to heat it was not designed to take directly.
Hearth and Surround Care
We clean ash and soot from hearth stone, brick, and tile without abrasives that would etch the surface. For masonry fireplaces in older Henderson neighborhoods, we also check the mortar joints in the firebox and the lintel bar above the opening, since both take direct heat every time you light a fire.
Chimney Services
Chimney Services is the umbrella term for everything that keeps a chimney system safe and functional: sweeping, inspection, diagnosis, repair, lining, waterproofing, and cap replacement. Flint Chimney Co Henderson provides all of these under The Garrison Code, which means a documented scope of work, a written price, and a warranty that follows the work for a full year.
Inspection and Diagnosis
Every Henderson chimney service call includes a camera inspection of the flue interior, because the condition of the liner is the single biggest factor in whether a chimney is safe to use. We run the camera before and after cleaning, and we show you the footage, so you’re not taking our word for a repair recommendation without seeing it yourself.

Repair and Relining
When the camera shows cracked tiles, separated joints, or a rusted-through steel liner, we quote the repair in writing using HeatShield or DuraFlex materials specified to your chimney, not whatever is left on the truck. A flue relining in Henderson, replacing the inner liner that channels smoke safely out of the house, is often the difference between a chimney you can use and one you should not light until it’s fixed.

Chimney Sweep Certified
Chimney Sweep Certified means the technician working on your home has completed formal training in fire safety, flue dynamics, and code compliance, and has passed the certification examination for the chimney service trade. At Flint Chimney Co Henderson, our certified sweeps follow The Garrison Standard on every job, which is why our pricing, scope, and guarantee are always on paper before work starts.
What Certification Covers
A certified sweep understands creosote stages, clearance-to-combustibles requirements, and the differences in lining materials and how each should be cleaned. That matters in Henderson because we work on tile, pumice, and steel liners across the valley from Boulder City to Nellis AFB, and the wrong brush on the wrong liner shortens the liner’s life.
Training and Background Checks
Every technician we send into a Henderson home is background-checked and uniformed, so you know exactly who is walking through the door before they set foot inside. Hank Delano, who leads Flint Chimney Co Henderson, holds every technician to the same standard he set when we first opened here in 2002: if we wouldn’t want our own family breathing the air from a chimney we cleaned, we don’t walk away from it.
Gas Fireplace Cleaning
Gas Fireplace Cleaning removes dust, pet hair, and mineral deposits from the glass, burner, pilot assembly, and logs of a vented or vent-free gas fireplace, and it runs $189 to $329 in Henderson. Even though gas doesn’t produce creosote, it does produce soot when the air-to-fuel ratio drifts, and the white film on the glass is mineral etching from combustion byproducts, which is why this is not a DIY glass-cleaner job.
Burner and Pilot Service
We remove the logs, vacuum the burner ports, and clean the pilot assembly so the flame burns blue instead of yellow and sooty. In a Green Valley or Enterprise home using the fireplace as a primary heat source through a cold snap, a dirty burner means wasted gas and a yellow flame that leaves black streaks on the glass within a couple of weeks.
Glass and Log Set Cleaning
We clean the ceramic glass with non-abrasive cleaner, recondition the log set, and check that the ember bed material is not blocking the burner ports. Then we run the unit through a full lighting cycle and confirm the venting is drafting, because a gas fireplace in a tight Henderson home still moves carbon monoxide out through the chimney or direct vent.
Chimney Maintenance
Chimney Maintenance is the scheduled care that keeps a chimney from needing emergency repair: annual or biennial sweeping, waterproofing, cap inspection, and minor repairs caught before they become liner replacement. For most Henderson homeowners, the right maintenance cadence is one sweep every one to two years if you burn regularly, and one every two to three years if the fireplace is mostly decorative.
Waterproofing and Cap Checks
Henderson may be dry, but the freeze-thaw cycle in winter and the intense UV in summer work on chimney crowns and mortar joints all year. We check the cap, the crown, and the flashing at every maintenance visit, and we apply vapor-permeable waterproofing on masonry chimneys so water from the rare heavy rain doesn’t soak in and crack the brick from inside.
Seasonal Pre-Burn Prep
Before the first fire in fall, a maintenance visit clears the flue of anything the wind blew in, the dust that settled over summer, and any nests from birds that got in through a damaged cap. If you’re in Anthem or Southern Highlands and only burn between November and February, a single pre-season visit every other year is enough for most homes, and we’ll tell you that in writing rather than selling you a cleaning you don’t need.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We work on HeatShield systems across Henderson, including flue liners that have been resurfaced with HeatShield’s cerfractory material. Our technicians are trained in the manufacturer’s mixing and application protocol, which matters because the product’s performance depends on correct thickness and cure time, not just on patching a spot and calling it done.
We also stock DuraFlex stainless steel liner components for relining jobs, including the connectors and caps that are specified for the system. And for masonry repairs and crown work, we use Gelco and Olympia Chimney products where they match the job. Whether you have one of these brands or a different make entirely, we can service it and give you a written quote before we start.
Signs You Need a Pro Right Now
- Smoke enters the room when you light a fire. This usually means the damper is not open, the flue is partially blocked, or the house is too tight to draft. It’s not a quirk to live with; smoke in the living space means carbon monoxide is also present, and that needs a pro’s eyes.
- You smell a sharp campfire odor even when the fireplace is cold. Creosote off-gasses on humid or windy days, and a strong smell means enough has built up to be a fire hazard. A Henderson home that smells like a campsite inside is telling you the flue is coated.
- Black flakes are falling into the firebox. That’s creosote shedding from the flue walls above, and it means the deposit is thick enough to ignite. When it burns, it burns hot enough to crack terra cotta liners and start a chimney fire.
- The fireplace damper is rusted or hard to move. In Henderson’s low humidity, a rusted damper usually points to a chimney cap that has failed and let rain in. If water is getting in, the liner and mortar are degrading even when you aren’t using the fireplace.
- Animals have been in the chimney. Nesting material, droppings, or the sound of scratching means the cap is missing or damaged. Bird and rodent nests block the flue and burn, and the waste they leave inside is a health hazard you don’t want stirred into the house air.
Our Process, Step by Step
- 1
Written price before we begin. When we arrive at your Henderson home, we confirm the scope, then hand you a written price that covers the entire job. The number on that paper is the number on the invoice, and it’s non-negotiable from both sides.
- 2
Protecting your home. We lay drop cloths from the entry to the fireplace, run HEPA-filtered vacuums to capture dust at the opening, and seal the firebox so nothing escapes into the room. Our uniformed technician will walk you through what we’ll do before we start moving equipment.
- 3
Mechanical sweep and camera inspection. We run rotary brush heads sized to your flue, then feed a camera up the flue to document the liner condition before and after cleaning. You’ll see the footage, not just hear a summary.
- 4
Findings and recommendations, in writing. If we find cracked tiles, a failing liner, or a damaged cap, we show you the camera image and give you a written quote for repair. Nothing gets recommended without visual evidence you can verify yourself.
- 5
Cleanup and guarantee. We vacuum the firebox, reset your logs and grate, and walk you through the before-and-after camera footage. On any repair we perform, you get the 365-Day Done Right Promise in writing: if it fails within one full year, we return at no charge.
How Much Does Chimney Sweep Cost in Henderson?
A typical chimney sweep in Henderson runs $189 to $329 for a standard single-flue fireplace, which includes the full mechanical cleaning, the firebox cleanup, and the camera inspection. A two-flue home with a second fireplace or a freestanding stove will land toward the top of that range. What moves the price is the level of creosote buildup, the height and accessibility of the roof, and the type of liner in the flue. A glazed third-stage creosote job in a Sunrise Manor ranch costs more than a light soot cleaning in a newer Anthem build because the rotary work takes longer and may need a chemical pre-treatment. You avoid overpaying by insisting on a written price before the work starts, which is exactly how we operate. A free estimate from Flint Chimney Co Henderson includes the inspection, the camera check, and a line-item quote for anything we recommend. If you want to compare, call (775) 375-4267 and get the number in writing; you’ll know exactly what you’re approving.
Our Service Area Near Henderson
Flint Chimney Co Henderson serves the entire Henderson valley plus the surrounding communities: Green Valley, Anthem, Whitney, Paradise, Sunrise Manor, Winchester, Enterprise, Southern Highlands, and Nellis AFB. We also work regularly in Chimney Sweep in Spring Valley, Chimney Sweep in Boulder City, and across the valley. Our team is on the road in Henderson daily, which means we can usually schedule your sweep within the same week. To check availability in your neighborhood, call (775) 375-4267.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Henderson
A chimney sweep is the mechanical removal of soot, creosote, and debris from the interior walls of your chimney flue, smoke chamber, and firebox using rotating brushes, rods, and HEPA-filtered vacuums. The purpose is to remove combustible deposits that cause chimney fires and to restore proper draft so smoke and carbon monoxide exit your home instead of entering it. In Henderson, a proper sweep also includes a camera inspection so you can see the liner condition before and after. You can read more about our full Chimney Sweep in Henderson service area and process.
A standard chimney sweep in Henderson takes 60 to 90 minutes from the time we enter your home to the time we finish vacuuming the firebox. Heavy creosote buildup, a second flue, or a difficult roof can push that to two hours or a bit more. We schedule a window and honor it, and our uniformed technician will tell you early in the visit if the job is running longer than expected. Call (775) 375-4267 to schedule and we’ll give you a time frame in writing.
A standard chimney sweep in Henderson costs $189 to $329, including the mechanical cleaning, firebox cleanup, damper check, and camera inspection. Heavily glazed creosote, a second flue, or repairs found during the inspection will add to that, but only after we give you a written quote and only after you approve it. Every estimate is free.
Yes, we service HeatShield and DuraFlex systems throughout Henderson, including cleaning, inspection, and repair work. Our technicians are trained in the manufacturer protocols for both product lines, which means we clean them without damaging the liner surface and we install them according to the factory specification. If your chimney has a different brand or an unlined masonry flue, we service that too.
We answer the phone 24 hours a day, 7 days a week with a live person, so if you’ve had a chimney fire or suspect a blockage, you can reach us any time and we’ll schedule a visit. A chimney fire can crack liners and warp dampers even if the visible flames stayed in the flue, so a post-fire camera inspection is what tells us if the chimney is still safe. For active fire or gas leaks, call 911 first; for everything else, reach us at (775) 375-4267.
Every repair we perform carries the 365-Day Done Right Promise in writing, valid for one full year from the service date. If a covered repair fails within that year, we return to your Henderson home and fix it at no charge, no argument. The guarantee is documented on the written quote and invoice, so you have it in your hand before the work starts.
Clear the area in front of the fireplace for about six feet, move anything fragile off the mantel, and don’t light a fire for at least 24 hours before the appointment. We bring drop cloths, HEPA vacuums, and all equipment, so there’s nothing else you need to do. We’ll handle the rest, and we’ll leave the room cleaner than we found it.
Schedule Your Chimney Sweep Service in Henderson Today
Get a written price before any work starts, a camera inspection that shows you exactly what’s inside your flue, and a live person on the phone whenever you call. Hank Delano and the team at Flint Chimney Co Henderson have worked under The Garrison Standard since 2002, and every repair carries our 365-Day Done Right Promise. Call (775) 375-4267 for a free estimate, day or night.
Written by Hank Delano, Owner at Flint Chimney Co Henderson, serving Henderson since 2002.