Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterLevel 2 Inspection in Henderson, NV
A Level 2 chimney inspection in Henderson typically runs $250 – $450 and is the inspection level required whenever anything about your chimney system has changed: a new appliance, a new liner, a change in fuel type, a property transfer, or an event like an earthquake, chimney fire, or lightning strike. Flint Chimney Co Henderson performs Level 2 inspections using specialized camera equipment that goes where a Level 1 visual check cannot, and every inspection comes with a written report and a written price for any repair work we find.
If you’ve bought or sold a home in Henderson, your real estate transaction likely triggered a Level 2 inspection requirement. That’s the standard. But plenty of homeowners call us because something changed and they want documentation before winter. Whatever the reason, call (775) 375-4267 and we’ll schedule it. We’re part of the Garrison Partners family, home to independently owned chimney service companies operating under the same written standard since 2002.
This service sits under our broader Chimney Cleaning & Sweep work, but a Level 2 inspection is a different animal than a routine sweep. It’s a diagnostic procedure, not a maintenance procedure. Here’s what that means in practical terms.
When You Need Level 2 Inspection
A Level 1 inspection is the basic visual check that accompanies a standard cleaning. A Level 2 inspection goes further: we run a video scan through the full interior of the flue, inspect accessible portions of the attic and crawl space, and check clearances to combustibles. The National Fire Protection Association (NFPA 211) specifies exactly when a Level 2 is required. Here are the scenarios that trigger it:
- You’re buying or selling a home. In Henderson, most home inspections flag the chimney for a Level 2 check during escrow. Sellers need it to close; buyers need it to avoid inheriting a flue problem.
- You made a change to the system. Switched from a wood-burning fireplace to a gas insert? Added a new liner? Changed a furnace or water heater that vents into the same flue? That’s a Level 2.
- You had a chimney fire. Even a small one. Creosote fires can crack clay liners in ways you’ll never see from the rooftop or the firebox. We’ve seen cracked liners in Green Valley Ranch homes where the homeowner said the fire “wasn’t that bad.”
- You had a weather or structural event. The desert monsoon season brings wind gusts that stress chimney caps and crowns. Earthquakes, rare but real here, shift masonry. Lightning strikes can fracture flue tiles. Any of these calls for a Level 2.
- Your chimney hasn’t been used in years. In Henderson, summer abandonment is common. A flue sitting unused for three or four seasons accumulates dust, debris, and sometimes animal nests. Before you fire it up again, a Level 2 tells you if it’s still safe to use.
- Your insurance company asked for it. Some policies require a Level 2 inspection after a claim or before renewing coverage on a home with a wood-burning fireplace.
If any of these apply to you, call (775) 375-4267. We’ll tell you over the phone whether a Level 2 is the right call or whether a Level 1 sweep will do the job. We won’t sell you an inspection you don’t need.
Our Level 2 Inspection Process
Flint Chimney Co Henderson runs every Level 2 inspection under The Garrison Standard, the written operating code every Garrison Partners location follows. That means the process is fixed, documented, and identical each time. No shortcuts, no skipped steps. Here’s what happens when we show up:
- Written scope and price before we start. We walk the exterior, the firebox, and the accessible roof area. Then we hand you a written price for the inspection. That number doesn’t move. The invoice you approve is the invoice you pay.
- Video scan of the full flue interior. We run a camera from the firebox up through the full length of the flue. This catches cracked clay tiles, separated liner sections, missing mortar joints, and creosote glaze that a mirror and flashlight from the roof would miss. We review the footage with you on the spot.
- Accessible attic and crawl space check. We inspect the portions of the chimney chase and flue that pass through your attic or crawl space, looking for clearances to combustibles and any signs of heat damage or water intrusion.
- Exterior and crown inspection. We check the chimney crown, cap, flashing, and masonry from the roof where safe to access. Henderson’s sun does a number on crowns; hairline cracks from UV exposure are common after a decade.
- Written report with photos. You get a documented report with camera stills of anything we find, a plain-language explanation of what it means, and a written repair quote if work is needed. The report is yours to keep, whether you hire us for repairs or not.
- Repair recommendation, not pressure. If we find something that needs fixing, we tell you straight. We give you the written price and let you decide. If a repair is covered under our 365-Day Done Right Promise and fails within a year, we return at no charge. That’s the guarantee, in writing, every time.
Level 2 Inspection Pricing in Henderson
We publish our pricing because you should never have to call just to learn a ballpark. A standalone Level 2 chimney inspection in Henderson runs $250 – $450 depending on chimney height, roof access, and whether the flue has been recently used or is heavily coated with creosote. If we’re already at your house for a Chimney Cleaning & Sweep and you want the Level 2 camera scan added on, the combined price is lower than booking them separately.
| Service | Typical Price Range in Henderson |
|---|---|
| Standalone Level 2 inspection | $250 – $450 |
| Level 2 inspection added to a chimney sweep | $150 – $250 add-on |
| Written repair estimate after inspection | Free, included with inspection |
| Return visit if a covered repair fails within 365 days | $0 |
What affects the price? Chimney height is the big one. A single-story ranch in Whitney Ranch is quicker to access than a three-story home in Anthem or MacDonald Ranch. Roof pitch matters too; steep roofs require more safety setup. If your flue is heavily coated with third-degree creosote, the camera may need a preliminary sweep to get clear footage, which adds to the total. We’ll tell you all of this before we start, in writing.
Call (775) 375-4267 for an exact quote. Estimates are free, and the number we give you is the number you’ll pay.
What a Level 2 Inspection Catches That a Level 1 Misses
A Level 1 inspection covers the readily accessible parts of your chimney: the firebox, the damper, the visible portion of the flue from the roof, and the basic exterior. It does not inspect the full interior length of the flue. A Level 2 does. That difference matters more in Henderson than in many markets, because our climate produces specific failure patterns:
- UV-damaged crowns. The Henderson sun breaks down crown sealant faster than freeze-thaw cycles do in northern climates. A cracked crown lets water into the masonry, which erodes mortar joints from the inside.
- Desert dust and debris accumulation. The wind blows fine dust into unused flues all summer. Combine that with a bird nest or a rodent carcass, and you’ll get a draft problem or worse when you light the first fire in November.
- Creosote glaze in seldom-used wood-burning fireplaces. Homes in Green Valley and Seven Hills often use their fireplaces only a handful of times per year. That produces the conditions for glazed creosote, which is harder, denser, and more flammable than the flaky kind. A camera scan shows exactly where it’s built up.
- Improper gas insert installations. We see a lot of gas inserts in Henderson living rooms. When an insert was installed without properly sizing or connecting the liner, exhaust gases don’t vent correctly. A Level 2 video scan catches this right away.
None of these show up in a rooftop glance. That’s why the camera matters, and why we bring it on every Level 2 inspection.
Materials We Work With During Repairs
If your Level 2 inspection turns up a problem, the repair quote will specify the exact materials we’ll use, by brand. We work with professional-grade chimney products from manufacturers like DuraFlex for stainless steel liners, HeatShield for clay liner repair and resurfacing, and Olympia Chimney for caps and dampers. We name these brands in the written quote so you can verify the quality independently. We don’t use off-brand parts to save a buck, and we don’t leave you guessing what’s going into your chimney.
FAQs – Level 2 Inspection
How much does a Level 2 chimney inspection cost in Henderson?
A standalone Level 2 inspection in Henderson typically costs $250 – $450, and the price depends on chimney height, roof pitch, and flue condition. We give you a written price before any work begins. Call (775) 375-4267 for a free estimate.
Is a Level 2 inspection required when I sell my house?
In most Henderson real estate transactions, yes. Home inspectors flag the chimney for a Level 2 inspection when there’s been a change to the system or when the chimney’s condition is unknown, and many lenders and insurance companies require documentation before closing. We perform Level 2 inspections for escrow routinely and provide the written report you’ll need.
How long does a Level 2 inspection take?
Most Level 2 inspections take 60 to 90 minutes on site, depending on roof access and chimney height. You’ll get the written report the same day, before we leave your property.
Do I need a chimney sweep before a Level 2 inspection?
Not always. If your flue is heavily coated with creosote, we may need to sweep it first so the camera gets clear footage. We’ll tell you if that’s the case when we arrive. Call (775) 375-4267 and we’ll walk you through what to expect for your specific chimney.
What happens if the inspection finds a damaged liner?
We’ll show you the camera footage, explain what the damage means in plain language, and give you a written quote for the repair, with specific materials named by brand, like DuraFlex or HeatShield. If we do the repair and it fails within a year, we return at no charge under our 365-Day Done Right Promise. You decide whether to proceed, with the information in hand.
Call (775) 375-4267 to schedule a Level 2 inspection in Henderson. A live person answers the phone, day or night, and your price is in writing before we start. That’s how we’ve done it since 2002, and that’s how it’ll go at your house.
Written by Hank Delano, Owner at Flint Chimney Co Henderson, serving Henderson.