Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Henderson?
Chimney cap and crown work in Henderson, NV typically runs between $185 and $1,400 depending on the material, the size of your chimney, and whether you’re replacing one or both components. A standard galvanized steel chimney cap install averages $185 to $385, while a full custom crown rebuild with concrete or a cementitious overlay lands between $800 and $1,400. Most cap-only jobs are done in under an hour; crown work usually takes a full day including cure time prep.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s what homeowners in Henderson actually pay for cap and crown work in 2026. These are the numbers we quote around Anthem, Green Valley Ranch, Whitney Ranch, and Water Street District on a weekly basis.
| Job Type | Typical Price Range | What’s Included |
|---|---|---|
| Galvanized steel cap (standard flue, single) | $185 – $285 | Cap, mounting hardware, basic installation |
| Stainless steel cap (single flue) | $265 – $385 | Rust-resistant cap, hardware, installation |
| Copper cap (single flue) | $400 – $650 | Copper cap, hardware, installation |
| Multi-flue cap (covers 2-3 flues) | $350 – $550 | Full-width cap, hardware, installation |
| Custom stainless multi-flue cap | $550 – $850 | Measured-to-fit cap, hardware, installation |
| Crown repair (cracks, minor spalling) | $300 – $550 | Crack sealing, surface prep, bonding agent |
| Crown seal/recoat (cementitious overlay) | $450 – $750 | Full surface prep, polymer-modified coat |
| Full crown rebuild (concrete, formed) | $800 – $1,400 | Demolition, form building, pour, finish, curing |
| Cap + crown rebuild (bundled) | $1,000 – $1,800 | Both jobs together at reduced combined cost |
Those numbers include labor and basic materials. If your chimney is on a steep roof pitch, a second or third story, or has cracked flue tiles that need addressing at the same time, the price moves up. In Henderson we almost never see a job that can’t be quoted flat, and every quote is written before we start.
What Drives the Price Up or Down
The single biggest factor is crown condition. If your existing crown can be sealed and recoated, you’re looking at $450 to $750. If it’s spalled to the point where the concrete is crumbling, a full tear-out and rebuild is the only thing that stops water from getting into the chase, and that runs $800 to $1,400. Cap material is the second driver: galvanized is the budget option, stainless is the middle, and copper is where it gets expensive but also pretty much permanent.
Henderson’s climate plays a role too. Our summers hit 110°F regularly, and the UV exposure breaks down uncured or poorly mixed crown concrete faster than it would in a cooler climate. That’s why we spec polymer-modified mixes for crown work in this market. They hold up when the monsoon season hits and the temperature swings 40 degrees overnight.
What Affects Chimney Cap & Crown Pricing in Henderson
- Access and roof pitch. Henderson’s newer builds in Inspirada and Cadence tend to have steeper roof lines and taller chimneys than the older ranch-style homes off Boulder Highway. Steeper pitches and two-story structures mean more setup time, safety gear, and labor.
- Crown thickness and condition. A crown built thin from the start fails faster. If we’re doing a rebuild, we pour at a minimum 2 inches thick at the edges with a proper drip edge, because Henderson’s heat-and-rain cycle is brutal on thin concrete.
- Material choice. Galvanized steel runs $185 to $285. Stainless runs $265 to $385 and holds up longer against the hard water we get from Lake Mead. Copper runs $400 to $650 and is effectively a one-time purchase.
- Number of flues. A single-flue cap is straightforward. A multi-flue cap that spans two or three flue tiles requires custom fabrication in about 30% of Henderson homes we service, especially on older ramblers in the Green Valley area.
- Chase cover and flashing condition. If the cap failed and water already got into the chase, the metal chase cover underneath may be rusted through. Replacing it adds $275 to $500 to the total.
- Pre-existing water damage. If the crown has been cracked long enough, water may have migrated into the flue liner or firebox. We’ll flag that in the written quote before any cap or crown work begins.
Cap and Crown Explained in Plain Words
First, these are two different parts. The crown is the concrete or mortar slab that sits on top of the chimney stack. Its job is to shed water away from the flue and the masonry. The cap is the metal lid that covers the flue opening itself. Its job is to keep rain, birds, and debris from dropping straight down into your fireplace or furnace flue.
When either one fails, Henderson’s monsoon-season downpours become a real problem. A cracked crown lets water soak into the brick-and-mortar, which spalls the face of the brick and eventually rots the framing where the chimney passes through the roof. A missing or rusted-out cap lets rain run straight down the flue liner, which means water in the firebox, rusted dampers, and in some cases a buckled floor around the hearth.
We approach cap and crown work the same way we do every repair at Flint Chimney Co Henderson: written price before the first tool comes off the truck, materials specified by name, and a one-year written guarantee on everything we install. That’s the Garrison Standard, plain and simple.
How to Save on Chimney Cap & Crown
Bundle the Cap and Crown Together
If both need work, do them at once. A bundled cap and crown rebuild runs $1,000 to $1,800, which is roughly $100 to $300 cheaper than doing them separately because we’re already on the roof, already set up, already doing the prep. You also avoid paying for a second trip charge.
Act Before the Crown Cracks Deep
A crown that’s showing hairline cracking but no spalling can often be sealed and recoated for $450 to $750. Wait another year or two, and the cracks widen enough that chunks start breaking off, and you’re into a full rebuild at $800 to $1,400. Seasonal rain will tell you which direction your crown is going. Most Henderson crowns that get a cosmetic patch job in spring need serious attention by late fall.
Choose Materials That Match Your Timeline
If you plan to sell within a few years of the work, galvanized steel at $185 to $285 is an honest, functional choice. If this is the house you’re staying in, stainless at $265 to $385 makes more sense than paying for copper at $400 to $650 unless you specifically want the look of copper.
Get a Free Estimate Before You Commit
Every estimate from Flint Chimney Co Henderson is free and written. The price we quote is the price on the invoice. If a covered repair fails within 365 days of installation, we return at no charge and fix it. No argument, no re-bid, no phone tag with a service manager. Call (775) 375-4267 and a live person picks up. We schedule back-to-back appointments in Henderson and keep them.
What Happens During a Cap or Crown Job
Here’s the sequence, so you know exactly what to expect from a crew operating under the Garrison Standard:
- Written quote up front. Before any work begins, you get a written price that names the scope, the materials, and the guarantee. You approve it, and the number doesn’t change.
- Inspection of the chimney top. We check the crown, cap, flue tiles, chase cover, and flashing. If we find water damage that changes the scope, we stop and tell you before doing anything else.
- Cap removal and crown prep. The old cap comes off, and the crown surface is cleaned and prepped. For a rebuild, the existing crown is demoed and new forms are set.
- Installation. The new cap goes on, or the new crown is poured and finished with a drip edge and a proper slope away from the flue.
- Cleanup and a written receipt. Every job ends with the work area swept, the roof checked for nails, and a written receipt that states the guarantee term: 365 days from the service date.
Background-checked, uniformed technicians do the work. You know exactly who is walking through your door. We arrive inside the appointment window, and we don’t leave until the job is done and the roof is clean.
Henderson-Specific Risk Factors We See Every Week
Three things show up repeatedly in Henderson chimney work that you won’t find in a generic chimney guide:
- Lake Mead hard water. Evaporative cooling systems and sprinkler overspray can push mineral-heavy water onto chimney crowns, especially in older subdivisions where foundation settlement has shifted the roofline. We see mineral staining that accelerates surface erosion.
- Long-haul pigeon pressure. Henderson’s pigeon population is relentless, and a missing cap is an open invitation. Pigeon guano is acidic and accelerates metal corrosion on chase covers and dampers. A proper cap with side mesh stops the entry.
- Wind-driven dust and monsoon downpours. Summer monsoons hit fast and hard against the McCullough Range, and the wind can drive rain sideways into an uncapped flue. A crown without a proper drip edge will channel water straight down the brick face.
If your house is anywhere from Anthem to Cadence, these aren’t hypotheticals. We quote for them every week.
Learn more about our chimney cap and crown services in Henderson or head back to the home page for all our chimney repair services.
FAQs – Chimney Cap & Crown Cost
How much does it cost to replace a chimney cap in Henderson?
A chimney cap replacement in Henderson costs $185 to $650 depending on material and flue count. A standard galvanized steel cap for a single flue runs $185 to $285; stainless steel runs $265 to $385 for a single flue or $550 to $850 for a custom multi-flue cap. Every cap replacement includes removal of the old cap, surface cleaning, and installation with new hardware. Call (775) 375-4267 for a written quote, free of charge.
Is it cheaper to repair or replace a chimney crown?
It’s cheaper to repair a crown if the cracking is surface-level. A crown seal and recoat runs $450 to $750 in Henderson, while a full tear-out and rebuild runs $800 to $1,400. The break-even point is structural: if chunks of concrete are missing or the crown has spalled to the point of exposing the aggregate, a repair will fail within a year or two. In that case, a rebuild is the only option that won’t have you calling again after the next monsoon. Call (775) 375-4267 and we’ll tell you straight which one your crown needs.
Can you fix a chimney cap and crown the same day in Henderson?
Yes, most cap-only replacements are done the same day, and we can typically get to them within 48 hours of your call. A crown rebuild takes a full day on site plus cure time, but the physical work is done in one visit. We schedule throughout Henderson and we keep the appointment window. Call (775) 375-4267 to check today’s availability.
How long does a chimney cap last in Henderson’s climate?
A galvanized steel cap in Henderson lasts 5 to 8 years before the UV and monsoon moisture start visible corrosion. Stainless steel lasts 12 to 20 years, and copper typically last 25 years or more. The biggest variable is the quality of the mounting hardware, which is why we use stainless hardware on every cap install regardless of the cap material. A cap that’s rusted through at the bolts is doing nothing for your flue.
What happens if I have a cracked crown but don’t fix it?
An unrepaired cracked crown in Henderson will let water into the masonry stack, and the damage compounds quickly. Within 2 to 3 years, most crowns go from hairline cracks to full spalling in our climate. By then, water has reached the flue liner, the chase cover, and in some cases the firebox. The total repair bill climbs from a $450 to $750 recoat job to $1,000 to $1,800 in cap, crown, and water damage work. The cheapest time to fix a crown is the day you first see a crack.
Do you charge for a chimney cap and crown estimate in Henderson?
No. Estimates from Flint Chimney Co Henderson are free and always written. You approve the price before any work starts, and the written number is the final number. If a repair we complete fails within 365 days, we return and fix it free of charge. Call (775) 375-4267 and we’ll get you on the schedule.
Call For a Free Written Estimate
If your chimney cap is rusted out or your crown is cracked, the cheapest day to fix it is today. Flint Chimney Co Henderson gives you a written price before any work begins, at no cost, with no obligation. A live person answers the phone 24/7. Call (775) 375-4267 and we’ll get you on the schedule in Henderson, Green Valley, Anthem, or anywhere in the greater Henderson valley.
Pricing reflects the Henderson market as of 2026. Flint Chimney Co Henderson offers free estimates – call (775) 375-4267.
Written by Hank Delano, Owner at Flint Chimney Co Henderson, serving Henderson and the surrounding valley since 2002.
What Our Customers Say
"Smoky fireplace for years. Turned out the cap was clogged. Swapped it and the smoke is gone."
- Brandon T."Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P.