Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Anthem
Chimney repair in Anthem typically runs $195 – $1,400 depending on whether we’re patching a flashing leak, rebuilding a crown, or replacing a warped flue liner, and most jobs are wrapped up in one visit. If you’re noticing water stains on the ceiling near the fireplace, a smoke smell that won’t leave, or crumbling mortar on the exterior chimney, call us at (775) 375-4267 and we’ll get a background-checked, uniformed tech out to your Anthem home with a written price before any work starts. Most Anthem homes were built in the 1990s and 2000s, which means factory-built metal chimneys, not old brick stacks, and those need a different repair approach than what most chimney companies are used to. Flint Chimney Co Henderson knows exactly what those zero-clearance units need, because we see them every week across Anthem, Henderson, and the surrounding valley.
Key takeaways:
- Every repair carries a written 365-Day Done Right Promise, valid for a full year.
- You get a written dollar figure before a single tool comes off the truck.
- Anthem’s factory-built chimneys have specific failure modes: warped liners, corroded caps, pack rat nests.
- Free second visit if a covered repair fails within the guarantee period. No charge, no argument.
Why Flint Chimney Co Henderson Is Anthem’s Preferred Chimney Repair Company
We’re part of the Garrison Partners family of chimney companies, founded in 2002, and we operate under one code: The Garrison Standard. That means the price you approve in writing is the price you pay, the tech who arrives is background-checked and uniformed, and every repair is backed by a documented one-year guarantee. Anthem homeowners call us because chimney work here is different. The desert wind carries sand that slowly eats at metal flashing and chimney caps. The short winter season means fireplaces sit idle for months, and pack rats move into flues without anyone noticing. Our Chimney Repair team sees these patterns every single week across Anthem and knows what to look for before small problems turn into ceiling stains or smoke backing into a living room.
Response time to Anthem is straightforward: we dispatch from our Las Vegas office, and most Anthem calls are scheduled within a few business days. If you’re dealing with an active leak or smoke backup, tell the live person on the phone and we’ll prioritize the visit. They answer around the clock, every day of the week, no voicemail trees. Anthem homeowners also mention the same thing in reviews: the tech explained the repair in plain words, showed the camera footage, and handed them a written guarantee before leaving. That’s the standard, on every job, in every neighborhood from Anthem Country Club to the tract homes near Eastern Avenue.
Styles & brands we work with
Chimney Crown Repair in Anthem
Chimney Crown Repair in Anthem is often the difference between a dry home and a slow water leak that stains drywall and rots framing. The crown is the concrete or metal cap at the very top of the chimney, the surface that sheds rain and keeps water from seeping into the flue and the chase. In Anthem’s desert climate, crowns on factory-built chimneys take a beating from sun, temperature swings, and wind-blown sand. Cracks open up, water gets in, and the metal components underneath start corroding. We repair crowns on both masonry and prefabricated chimneys, using professional-grade materials like HeatShield and Gelco to seal and rebuild the surface so water can’t get through.
When a Crown Needs Work
A hairline crack might not look like much, but it expands with every freeze-thaw cycle in Anthem’s cool winter nights and every 110-degree summer day. If you see flaking concrete, exposed aggregate, or a rust-stained chimney cap, the crown has already started failing. We inspect it with a camera, show you the footage, and write a price for the repair before any work begins.
Metal vs. Masonry Crowns
Most Anthem homes have factory-built chimneys with metal crowns that are part of the original chimney system. Those corrode at the seams and around the cap, especially with sand abrasion. Masonry crowns on custom properties crack and spall, and usually need resurfacing with a flexible waterproof sealant. Either way, the repair is covered under our one-year written guarantee, and a crown repair in Anthem typically runs $350 – $900 depending on size and condition.
Chimney Repair Companies in Anthem
Chimney repair companies in Anthem are not all set up to handle factory-built systems, and that’s the first question homeowners should ask. A prefabricated metal chimney from the 1990s or 2000s is a completely different animal from a masonry chimney. The clearances are tighter, the flue components are thinner, and the repair options are narrower. If a company sends out a tech who mostly works on brick fireplaces, they may misdiagnose a warped metal liner or a corroded chase pan. Flint Chimney Co Henderson works on both systems, but our Anthem call volume is dominated by factory-built units, so our techs know those failure modes cold. We stock parts sized for common Anthem installations and don’t have to order and come back a week later.
What Separates a Good Repair Company
A respectable chimney repair company puts the scope in writing, shows you the damage on camera, and stands behind the fix. Ours does that on every call: a written price before work starts, photo and video documentation, and a 365-Day Done Right Promise on the repair.
How We Work in Anthem Homes
For a larger Anthem home with multiple fireplaces, we often schedule a Level 2 inspection first, especially if the homeowner hasn’t used the fireplaces in a season or two. That inspection finds issues like pack rat nests, warped liners, and corroded chase tops before they cause smoke backup or water damage. Then we lay out the repairs in order of urgency, with a price for each line item.
Trusted Brands We Service in Anthem
We specify materials by job, not by margin. That means an Anthem home with a warped factory-built flue gets a DuraFlex liner installed, not a generic off-brand pipe. A failed crown gets HeatShield or Gelco sealing products, both built for the thermal cycling and UV exposure common in southern Nevada. Olympia Chimney components are our go-to for caps, chase pans, and other metal parts on prefabricated systems. Because we stock these brands for local Anthem jobs, turnaround is faster and you’re not waiting on a distributor to ship a part from across the country. Flint Chimney Co Henderson has worked with these manufacturers since the early 2000s, and our techs know which product fits which Anthem installation.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Anthem Homes
- Corroded chimney caps and chase pans. Desert winds in Anthem carry fine sand that scours metal surfaces season after season. By the time a homeowner notices a ceiling stain, the chase pan under the cap has usually rusted through and needs replacement.
- Warped flue liners from previous DIY cleanings. Factory-built chimneys have thin metal liners, and aggressive brushing can warp them. We see this regularly in Anthem tract homes, where a well-meaning homeowner used a chimney cleaning kit from a hardware store and bent the liner out of shape.
- Hardened creosote in rarely used fireplaces. Anthem’s short winter means most fireplaces burn only a few fires a year. Creosote from those occasional fires hardens into a third-degree glaze that no brush removes. It takes a chemical treatment to break it down safely.
- Pack rat nests in unused flues. This one is nearly unique to our desert market. Pack rats move into chimneys that sit idle from spring through fall, building nests in the smoke chamber that block airflow. The first cold snap sends smoke pouring into the living room instead of up the flue.
Pricing for Chimney Repair in Anthem, NV
Here are the straight numbers for Anthem’s market. A flashing repair runs $195 – $450, depending on the size of the chase and how much metal needs replacing. Chimney crown repair runs $350 – $900. Flue relining with a DuraFlex liner typically costs $900 – $1,400 on a single-story factory-built unit, more on a two-story home. A full chase pan replacement on a larger Anthem property can reach $1,200 – $2,000 if the old pan is heavily corroded. What moves the price is access (two-story chase vs. single story), the condition of the surrounding metal, and whether we’re doing one repair or several at once. Every job gets a written price before work starts, and that number is the number on the invoice. Call (775) 375-4267 for a free estimate on your Anthem home.
We Also Serve Cities Near Anthem
Flint Chimney Co Henderson handles chimney repair across the southern Las Vegas valley. Beyond Anthem, our techs regularly work in Henderson, Spring Valley, Boulder City, and Nellis AFB. If you’re in any of those neighborhoods, the same written guarantee and upfront pricing apply, no matter which side of the 215 you’re on.
Serving Anthem, NV - Our Local Coverage Area
We’re based in the Anthem area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Anthem
Once a year, even with light use, because Anthem’s dormant season is exactly when pack rats move in and desert dust settles in the flue. An annual Level 2 inspection catches animal nests, warped liners, and corrosion before they become a smoke backup. Call (775) 375-4267 to schedule; we’ll give you a written price for the inspection before we start.
Yes, and we do it regularly. Most two-story Anthem tract homes use stucco-clad chimney chases with metal flues inside, and our techs access the flue from the top and the firebox opening rather than cutting into the chase. Stucco repair is rarely needed. If it is, we’ll tell you in the written scope before any work starts.
The most common issue in Anthem Country Club is corroded chase tops and caps on multi-fireplace homes, followed closely by warped liners from previous cleanings. Properties there tend to have larger chases and more exposed metal, so wind-blown sand does more damage over time. We inspect every fireplace on the property and price each repair separately.
That smell usually means a pack rat nest or accumulated dust is sitting in the flue above the gas logs, and the pilot light is slowly cooking it. In rare cases it’s a failing chimney liner inside a factory-built unit. We trace the odor with a camera, identify exactly where it’s coming from, and write a repair price before any work begins.
Prefabricated chimneys need crown work too, but the crown is metal rather than concrete. It corrodes at the seams and around the cap from Anthem’s sand-laden wind, and once water gets past it, the chase pan underneath starts rusting. We repair or replace metal crowns on factory-built units with Olympia Chimney components, and the repair carries the same one-year written guarantee.
If you’ve noticed water stains, a smoke smell, or you simply haven’t had your Anthem fireplace looked at in a couple of years, call Flint Chimney Co Henderson at (775) 375-4267. A live person answers every day, all day. We’ll schedule your visit, show up uniformed and background-checked, and put the price in writing before any work begins. The repair is covered for a full year under the 365-Day Done Right Promise, and if something fails inside that year, we come back at no charge. That’s the deal, in writing, on every Anthem chimney we touch.
Written by Hank Delano, Owner at Flint Chimney Co Henderson, serving Anthem and the surrounding valley since 2002.