A Flint company - serving Henderson, NV

Olympia Chimney Chimney Inspection Nationwide

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Olympia Chimney Chimney Inspection in Henderson: What to Know First

An Olympia Chimney chimney inspection in Henderson costs $149 – $289 for a Level 1 visual check and $289 – $499 for a Level 2 camera inspection, which is what most Henderson homeowners need. We run the camera through the flue, show you the footage on the spot, and give you a written price before any repair is discussed. That’s the whole deal: no guessing, no padding, no pressure. If you own a home in Henderson with an Olympia Chimney system and you haven’t had it looked at in the last two years, call (775) 375-4267 and we’ll get you on the schedule.

Call (775) 375-4267

How Olympia Chimney Products Fail – and How We Fix Them

Olympia Chimney builds solid products, but Henderson’s dry heat, hard water, and occasional monsoon-driven wind put stress on every chimney system out here. Here’s what we actually see on Olympia Chimney jobs in this valley, and what we do about it:

  • Olympia Ventis stainless steel liner corrosion at the flue cap seam. The Ventis double-wall stainless liner is good material, but the cap-to-liner junction is where Henderson’s wind-driven dust and the rare heavy rain find their way in. We see surface rust and pitting start there years before the liner body gives out. Fix: we pull the cap, inspect the seam, and replace the cap assembly with matching Olympia parts when the liner body still has life left. When the liner is done, we go with DuraFlex as the replacement and explain exactly why in the written quote.
  • Olympia pre-fab firebox refractory panel cracking. The refractory panels in Olympia pre-fab units (the ones that look like brick but aren’t) dry out and hairline-crack in Henderson’s low humidity. A hairline crack isn’t a fire hazard by itself, but if the crack deepens and exposes the metal firebox shell behind it, you need panels replaced before your next burn. We inspect panel condition on every Level 2 and tell you plainly whether it’s cosmetic or structural.
  • Chase cover deterioration on Olympia wood-burning systems. The galvanized chase top on an exposed Henderson roof bakes in 110-plus degree summers and eventually rusts through at the corners. Water gets in, rusts the flue exterior, and ruins insulation. This is one of the most common things we catch on Level 1 inspections in the Green Valley Ranch corridor. Fix: a new stainless chase cover, sized to the Olympia chase, with a proper cross-break so water sheds instead of pooling.
  • Improper aftermarket parts from prior contractors. More than once we’ve opened an Olympia unit and found a generic flue tile or a knockoff cap installed by someone who never bothered to order the correct part. The flue still drafts, but the joints don’t seat the way Olympia designed them. On inspection we flag every mismatched component, and we quote the correct Olympia part or a documented equivalent like Famco or Copperfield, depending on what’s available and what the budget allows.
  • Creosote buildup in Olympia pre-fab connectors. Pre-fab systems run hotter and faster than masonry, but the connector pipe between the firebox and the flue still accumulates creosote, especially in Henderson homes where people burn softwood or firewood from the local Home Depot that hasn’t fully seasoned. We measure the buildup, photograph it during the camera pass, and tell you if you’re in the safe zone or past it.
Explore

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Our Olympia Chimney Chimney Inspection Process

When you call Flint Chimney Co Henderson for an Olympia Chimney inspection in Henderson, here’s exactly what happens, start to finish:

  1. 1
    You call (775) 375-4267. A live person answers. We ask about your fireplace: wood-burning or gas, when it was last inspected, and anything you’ve noticed – smell, smoke backup, water stains.
  2. 2
    We arrive in a marked truck, uniformed, background-checked. We lay down drop cloths before bringing any tools inside. You know who’s in your house.
  3. 3
    We start with the roof. Chase cover, cap, flashing, and crown condition all get documented with photos before we ever look at the flue interior.
  4. 4
    We run the camera. For a Level 2, the camera goes down the full flue run, including the firebox, damper, and connector pipe. You watch the screen with us. You see what we see.
  5. 5
    We write up the findings. You get a written report with photos and a plain-English summary: what’s clean, what’s worn, what’s unsafe, what can wait, and exactly what each repair costs before any work is authorized.
  6. 6
    If you approve work, we do it then or schedule it. Every repair carries our 365-Day Done Right Promise in writing. If it fails within a year, we come back at no charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Olympia Chimney Chimney Inspection Costs in Henderson

Here are the real numbers for Olympia Chimney inspection work in Henderson:

  • Level 1 visual inspection: $149 – $289, done same visit.
  • Level 2 camera inspection: $289 – $499, includes written photo report.
  • Olympia chase cover replacement: $400 – $850 depending on chase size and material.
  • Refractory panel replacement for a standard Olympia pre-fab: $350 – $700 per panel, including labor to match, cut, and set.
  • Flue liner replacement (DuraFlex with insulation): $3,800 – $6,500 depending on flue height and access.

The inspection itself has a fixed written quote before we arrive. You’ll never get a number that changes when the tech walks in the door. For an exact quote on your Olympia system in Henderson, call (775) 375-4267 – the estimate is free.

Why Henderson Homeowners Call Flint Chimney Co Henderson for Olympia Chimney Work

We’re an independent Olympia Chimney service provider – we don’t work for the manufacturer, which means we’ll tell you when a part is worth buying OEM and when a quality aftermarket piece from Famco or Copperfield does the job for less. We stock DuraFlex, HeatShield, and Gelco materials for repairs that go beyond Olympia’s catalog. We put the price in writing before any tool comes off the truck. We give you a full-year written guarantee on every repair. And when you call us at any hour, a live person picks up the phone – not a voicemail tree. Hank Delano runs inspection crews across Henderson with one rule: tell me what the flue looks like, and I’ll tell you what it costs – no guessing, no padding.

FAQs

Need Chimney Cleaning help in Henderson? Licensed & insured · Camera-inspected response · free estimates
Call (775) 375-4267
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Flint Chimney Co Henderson responds fast. No obligation.

By requesting your free estimate, you agree to our Privacy Policy and agree that you may be contacted by phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Us
Call Now - 24/7 Dispatch