Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Henderson?
A chimney liner replacement in Henderson, NV typically costs between $2,900 and $6,500 for a standard single-flue home. A full chimney rebuild, which includes tearing down and reconstructing the chimney stack from the roofline up, runs $7,000 to $15,000 on average across the Las Vegas Valley. Most Henderson homeowners can expect to pay somewhere in the $4,000 to $8,000 range when the job includes both relining work and partial masonry repair, which is the most common scope we see on older homes in neighborhoods like Green Valley, Anthem, and MacDonald Ranch.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here is what each component of the work currently costs in the Henderson market. These are real numbers from jobs we have priced in 2025 and 2026, not national averages pulled from a generic database. Your final number will depend on chimney height, access, and the material you choose.
| Service Line Item | Henderson Price Range (2026) | What’s Included |
|---|---|---|
| Stainless steel liner installation (Flex or rigid) | $2,200 – $4,200 | Liner, insulation, top plate, rain cap, connection to appliance or fireplace |
| HeatShield cerfractory liner repair | $1,800 – $3,600 | In-place repair of damaged clay tile liner using HeatShield’s resurfacing system |
| Cast-in-place liner (thermocrete / Gelco) | $4,500 – $8,000 | Full poured liner system, best for deteriorated masonry chimneys |
| Partial chimney rebuild (above roofline, 3 – 5 ft) | $4,000 – $7,000 | Demolition, new masonry, crown replacement, wash, flashing repair |
| Full chimney rebuild (entire stack from roofline up) | $7,000 – $15,000 | Complete teardown and reconstruction of the above-roof chimney |
| Crown replacement / repair | $900 – $2,000 | Concrete or sealed crown work; often combined with liner or rebuild scope |
| Chimney inspection (Level 1 or Level 2) | $150 – $600 | Visual inspection or camera scope; Level 2 required for liner evaluation |
Those are the pieces. Most Henderson jobs combine at least two of them. The classic scenario we see: a homeowner books a sweep or inspection, we find spalling brick and a cracked clay tile liner, and the job lands somewhere around $5,500 for a stainless liner plus a partial rebuild above the roof. That is not an upsell. It is what the chimney actually needs to be safe and functional.
What Drives the Price Up or Down
A few things move the number in either direction. A single-story ranch home in Whitney Ranch with a straight flue and easy roof access will price lower than a two-story house in Seven Hills where the chimney is 30 feet up and the roof pitch is steep. If your chimney runs through the interior of the home rather than along an exterior wall, that helps. If it is an exterior chimney that has baked in the Nevada sun for 25 years, expect more masonry work. And if you have a two-flue chimney, a fireplace plus a furnace, the liner work doubles because each flue gets its own liner.
What Affects Chimney Liner & Rebuild Pricing in Henderson
These are the factors that actually move the quote number in this market. We list them here because homeowners deserve to know exactly what they are paying for before any work starts. That is how Flint Chimney Co Henderson operates, and it applies to every job we price in Henderson, Boulder City, and the surrounding valley.
- Chimney height and roof access. A 15-foot chimney on a low-pitch roof is a straightforward job. A 30-foot chimney on a two-story stucco home with a steep roofline requires scaffolding and more labor. That difference alone can add $800 to $1,500.
- Number of flues. Most chimneys have one flue. Many have two, one for the fireplace and one for a furnace or water heater. Each flue gets its own liner, and each one is a separate line item.
- Condition of the original clay tile liner. If the existing liner is intact but leaking small amounts of gas, a HeatShield resurfacing job may be enough, and that runs lower than a full stainless reline. If the clay tiles are cracked, spalled, or missing entirely, you need a new liner, not a patch.
- Material choice. Stainless steel flex liners from brands like Olympia Chimney and DuraFlex are the workhorse choice. Cast-in-place liners like Gelco’s system cost more because they add structural strength to the chimney itself, which matters on older Henderson homes with deteriorating masonry.
- Masonry condition above the roofline. The crown, the brick, the mortar joints, the flashing. If the top six feet of your chimney is crumbling, a rebuild is mandatory before you install a liner. Installing a liner in a chimney with failing masonry is like putting new tires on a car with a broken axle.
- Appliance type. Wood-burning fireplaces, gas fireplaces, gas furnaces, and water heaters all vent differently. The liner size and material must match the appliance BTU output and venting requirements. Gas appliances in particular require proper sizing to avoid condensation problems that rot liners from the inside.
The Henderson Climate Factor
Southern Nevada chimneys fail differently than chimneys in Ohio or Oregon. Henderson gets roughly 300 days of sun a year, summer temperatures push past 105, and the temperature swing between a 110-degree day and a 65-degree night puts enormous stress on masonry. Clay tile liners expand and contract repeatedly, and after 15 to 20 years in this climate, they crack. That is not a defect in your original chimney. It is what the desert does to it.
We also see wind-driven rain from the occasional monsoon storms pushing water into cracked crowns. When a crown fails, water gets into the chimney chase and the liner joints. Then the liner deteriorates faster. In neighborhoods like Green Valley Ranch and Silverado Ranch, where homes were built in the 1990s and early 2000s, we are now seeing the original clay liners and crowns hit the end of their service life at the same time. That is exactly when homeowners get the reline-and-rebuild quote.
How to Save on Chimney Liner & Rebuild
There is no shortcut on chimney work. But there are ways to avoid paying more than you need to, and ways to avoid paying for the same repair twice.
- Get the right inspection first. A Level 2 camera inspection costs a couple hundred dollars and tells you exactly what is wrong before you buy anything. Guessing at the problem and pricing it blind is how homeowners get burned.
- Don’t defer a failing crown. Replacing a crown is a $1,000 to $2,000 job. Rebuilding the top six feet of a chimney that failed because the crown was ignored is a $4,000 to $7,000 job. The math is not complicated.
- Bundle the scope. If you are already paying for roof access and setup for a liner, adding a crown replacement or minor masonry patchwork at the same time costs less than doing it as a separate visit.
- Match the material to the job. HeatShield resurfacing is a legitimate option for minor liner deterioration and costs less than a full stainless reline. But if the liner is structurally compromised, do not patch it. Pay for the right fix once.
- Know what the quote actually covers. Flint Chimney Co Henderson puts the full scope and price in writing before any work starts. Flashing, rain cap, liner insulation, debris cleanup, permit costs if required. If a contractor gives you a verbal number, you do not have a price. You have a guess.
Every job in Henderson gets a free estimate from our team. Call (775) 375-4267 and we will walk you through the chimney, show you what we are seeing, and put a number in writing. Nothing starts until you approve it.
Chimney Liner & Rebuild Timeline: What to Expect
A typical stainless steel liner installation takes one day on-site. A partial rebuild above the roofline takes two to three days depending on the weather and the extent of the brick work. A full chimney rebuild runs three to five working days, including curing time for the mortar and crown.
The sequence we follow at Flint Chimney Co Henderson matches Chimney Liner & Rebuild in Henderson best practices: inspect first, document what we find with photos, deliver a written scope and price, then schedule the work. No tools come off the truck until the homeowner approves the line items. That process is part of the Garrison Standard, the written operating code every Garrison Partners location follows, and it has been the way Hank Delano, owner at Flint Chimney Co Henderson, has run this shop since it opened.
On the day of the job, our background-checked, uniformed technicians arrive inside the window we gave you. We both know exactly who is walking through the door. We protect the work area, we keep the debris contained, and we leave the property the way we found it. The liners we install come from trade brands like DuraFlex, Olympia Chimney, and Famco, and we specify the material by the job, not by the margin. That is a distinction that matters when a competing quote undercuts us by $400 on paper and then shows up with a thinner gauge liner and no insulation.
What Happens If the Repair Fails?
Every chimney repair we do in Henderson carries a written guarantee, valid for one full year from the service date. It is called the 365-Day Done Right Promise. If a covered repair fails inside that window, we return at no charge and make it right. No argument, no prorated schedule, no fine print. That is the entire point of the guarantee.
This is worth saying plainly because the chimney industry is full of companies that vanish after the check clears. Our phones are answered by a live person 24 hours a day, seven days a week, including the day you call to say something does not look right. You will get a real technician, not a voicemail tree. If the repair is covered, you will not pay for the second visit.
For homeowners who have been burned before, which is most of the people who call us, this is the reason they stick around. The written price and the written guarantee are not marketing language. They are the operating rules.
Henderson Neighborhoods We Serve
Flint Chimney Co Henderson covers the entire Henderson area and the surrounding valley. We work regularly in Green Valley, Anthem, Seven Hills, MacDonald Ranch, Whitney Ranch, Silverado Ranch, Black Mountain, Lake Las Vegas, and downtown Henderson. We also handle jobs in Boulder City and the southeast Las Vegas corridor.
Each of these neighborhoods has its own housing stock and its own typical chimney configuration. Homes in Green Valley built in the 1980s and 1990s frequently have exterior masonry chimneys with single clay flues feeding a fireplace and a furnace. Homes in Anthem and Seven Hills skew toward two-story stucco construction with taller chimneys and more complex rooflines, which adds to the labor cost. The common thread across all of them is that the original clay liners and crowns are aging out at roughly the same time, and the desert climate accelerates every failure mode we see.
Why a Chimney Liner Actually Matters
The liner is the inner passage that channels smoke, gas, and combustion byproducts from your fireplace or appliance safely out of the house. It is not decorative. It is the thing that keeps heat from reaching combustible framing, keeps masonry from absorbing flue gases, and keeps carbon monoxide moving out instead of leaking into your living space.
When a clay tile liner cracks, three things happen. Heat escapes into the chimney chase, where it can ignite nearby framing in a chimney fire scenario. Flue gases leak into the masonry and dissolve the mortar from the inside. And water intrusion from a failed crown accelerates the whole cycle. A chimney fire or a carbon monoxide leak is the end result. This is not a cosmetic maintenance item. It is a safety system.
Gas appliances are subject to the same rules. A gas furnace vented through a cracked liner can push carbon monoxide back into the house. We have done Level 2 inspections in Henderson homes where the liner was cracked in six places and the homeowner had no idea anything was wrong. The chimney does not leave a mess on the floor when it fails. It just quietly stops doing its job.
Is a Chimney Rebuild Ever Optional?
Sometimes yes. If the crown is the only failing component, a crown replacement is enough. If the brick above the roofline is solid and only the liner is compromised, a liner install is the whole scope. A rebuild becomes necessary when the structural masonry itself has deteriorated to the point where the chimney cannot safely support a new liner or withstand the next monsoon season.
The honest way to answer this question is with a camera. A Level 2 inspection shows exactly where the cracks are, how deep the spalling goes, and whether the brick is structurally sound or held together by habit. We have given quotes where the homeowner expected a full rebuild and the camera showed the masonry was fine, and the job came in $3,000 lower than they had braced for. We have also had the opposite conversation. The camera does not lie, and we show you the footage.
FAQs: Chimney Liner & Rebuild Cost
How much does a chimney liner replacement cost in Henderson, NV?
A stainless steel chimney liner replacement in Henderson runs $2,200 to $4,200 for a standard single-flue installation, including the liner, insulation, top plate, and rain cap. If the job includes a partial rebuild or crown replacement, which it often does on older homes, the total typically lands between $5,000 and $8,000. Call (775) 375-4267 for a written quote, no cost and no obligation.
How much does a full chimney rebuild cost in Henderson?
A full chimney rebuild above the roofline runs $7,000 to $15,000 in Henderson depending on chimney height, accessibility, and the extent of the masonry damage. A partial rebuild of the top three to five feet runs $4,000 to $7,000. The estimate includes demolition, disposal, new brick and mortar, crown replacement, and flashing work. Call (775) 375-4267 and we will inspect the chimney and give you a firm written number.
Is it cheaper to repair or replace a chimney liner?
HeatShield cerfractory resurfacing costs $1,800 to $3,600 and can extend the life of a liner with minor cracking for years. But if the liner is structurally compromised, has missing tiles, or is already causing leaks into the masonry, a full stainless steel reline at $2,200 to $4,200 is the cheaper option over time. Patching a failed liner and paying for masonry repairs later costs more than doing the reline once. Our estimate is free, call (775) 375-4267.
Can you install a chimney liner in one day in Henderson?
Yes. A standard stainless steel liner installation on a single-flue chimney is a one-day job for our technicians in most Henderson homes. If the scope includes a partial rebuild or crown replacement, expect two to three days on-site. We give you a schedule with the written quote, and we arrive inside the window we set. Call (775) 375-4267 to talk through your timeline.
Do I need a permit for a chimney rebuild in Henderson?
Most chimney rebuilds in Henderson require a permit from the City of Henderson Building Division, and the contractor typically pulls it as part of the job. Liner-only replacement typically does not require a permit, but we verify on a job-by-job basis. Permit fees, when they apply, are line items on your written estimate. Call (775) 375-4267 and we will tell you exactly what applies to your house.
How do I know if my chimney liner is bad?
Signs include cracked or spalled clay tiles visible from the flue opening, pieces of clay tile collecting in the firebox, moisture staining on the ceiling or wall near the chimney, a smoky smell when the fireplace is not in use, and visible cracks in the chimney crown. The only way to know for certain is a Level 2 camera inspection, which we do as part of our service in Henderson. Call (775) 375-4267 to schedule one.
Get a Free Estimate in Henderson
If you are reading this and wondering what your chimney needs, call us. Hank Delano and the team at Flint Chimney Co Henderson will schedule a visit, inspect the chimney, show you the photos, and hand you a written price before any work begins. No pressure, no vague numbers, no surprises. That is how we operate under the Garrison Standard, and it is how we have done it since 2002 as part of the Garrison Partners family of chimney service companies.
Call (775) 375-4267 to book a free estimate. A live person answers, day or night.
Pricing reflects the Henderson market as of 2026. Flint Chimney Co Henderson offers free estimates – call (775) 375-4267.
Written by Hank Delano, Owner at Flint Chimney Co Henderson, serving Henderson, NV since 2002.
What Our Customers Say
"Sweep showed up on time, in uniform, and ran a tight job. Cleaned the flue, inspected the firebox, and gave me a short written report. Veteran-run and it shows."
- Walt R."Smoky fireplace for years. Turned out the cap was clogged. Swapped it and the smoke is gone."
- Brandon T."Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S.